CME LC-60 All Terrain Track – Mounted Drill

• Travel on or off road – tracks are rubber
• Solid & hollow stem augering
• Shelby sampling
• SPT’s
• Dynamic cones
• Vane shears
• 5 ft. continuous core sampling
• Angle drilling capabilities

Space Required to Operate
3 ft. (.9 m) on side of unit
Space desired at rear of unit
8 ft. (2.4 m)
Distance required from overhead power lines
23 ft. (7 m)

Equipped with Automatic SPT Hammer
Height of unit
10.5 ft. (3.2 m)
Height of unit mast up
11-17 ft. (3.4-5.2m)
Width
6’4” (2.0m)
Weight
15,500 lbs. (6.8 Tonne)

B 61 HD Truck Mounted Drill

• Solid & hollow stem augering
• Shelby sampling
• 5 ft. continuous core sampling
• Instrumentation installations
• Monitor well installations

Space Required to Operate
5 ft. (1.5 m) on side of unit
Space desired at rear of unit
8 ft. (2.4 m)
Distance required from overhead power lines
23 ft. (7 m)

Equipped with Automatic SPT Hammer
Height of unit
12.5 ft. (3.8 m)
Height of unit mast up
30 ft. (9.1 m)
Width
8 ft. (2.4 m)
Weight
28,000 lbs. (13 Tonne)

B 61 HDX Tandem Truck Mounted Drill

• Solid & hollow stem augering
• Shelby sampling
• 5 ft. continuous core sampling
• Instrumentation installations
• Monitor well installations

Space Required to Operate
5 ft. (1.5 m) on side of unit
Space desired at rear of unit
8 ft. (2.4 m)
Distance required from overhead power lines
23 ft. (7 m)

Equipped with Automatic SPT Hammer
Height of unit
13.2 ft. (4 m)
Height of unit mast up
30 ft. (9.1 m)
Width
8 ft. (2.4 m)
Weight
35,000 lbs. (16 Tonne)

B 47 4X4 Truck Mounted Drill

• Solid & hollow stem augering
• Shelby sampling
• SPT’s
• Dynamic cones
• Vane shears
• 5 ft. continuous core sampling

Space Required to Operate
5 ft. (1.5 m) on side of unit
Space desired at rear of unit
8 ft. (2.4 m)
Distance required from overhead power lines
23 ft. (7 m)

Equipped with Automatic SPT Hammer
Height of unit
10.5 ft. (3.2 m)
Height of unit mast up
20 ft. (6.1 m)
Width
8 ft. (2.4 m)
Weight
17,640 lbs. (8 Tonne)

B 61 All Terrain Track Mounted Drill

Equipped with Moyno Pump for grouting. Operates in the same manner as the B 61 Truck mounted
in off road conditions. We have our own truck and trailer to mobilize and demobilize the track drill.

• Solid & hollow stem augering
• Shelby sampling
• 5 ft. continuous core sampling
• Instrumentation installations
• Monitor well installations

Space Required to Operate
5 ft. (1.5 m) on side of unit
Space desired at rear of unit
8 ft. (2.4 m)
Distance required from overhead power lines
23 ft. (7 m)

Equipped with Automatic SPT Hammer
Height of unit
12.5 ft. (3.8 m)
Height of unit mast up
30 ft. (9.1 m)
Width
9.2 ft. (2.8 m)
Weight
28,000 lbs. (13 Tonne)
Ground Pressure of Track
2.5 p.s.i.

Van Truck

Decontamination Unit, Hot water pressure washer, Hauls water, Cementing and grouting equipment and supplies.

Large Diameter Auger

6 1/4 In. inside Diameter hollow stem auger for difficult standpipe installations. Can drill through centre of hollow auger with solid stem auger.

75 ft. available

Deck Truck

Ford F350 used for hauling supplies for the project as well as the crew.